Password Required For GunLock

(Radio Wide, User Information and Passwords)

HGDefinitionMob.jpg

ENABLE.jpg Causes the GunLock feature to be disabled whenever the radio is locked. In order to initiate this feature when the radio is powered-on and in a radio-locked state, the radio must first be unlocked (with a valid password entered from the keypad). Once the radio is unlocked, the feature is radio-user initiated with a DotRed.png GunLock button-press. This feature applies on a radio-wide basis.

Disabled.jpg When disabled, a GunLock button-press programmed on a Bottom Function Programmable Button initiates this feature, regardless of a radio-locked state. See the Warning.

HGWarning.jpg

 

The Top Function Programmable Buttons are always disabled by Radio Lock, regardless of the state of this feature; therefore, if there is a requirement to bypass a radio-locked state, GunLock must be programmed on a Bottom Function Programmable Button.

HGImportantNote.jpg

 

  • When the Secure Operation field is set to "Disabled" or "ADP", the Radio Lock password is stored in the radio's codeplug. WFForward.png The initial password is set in the Unlock Password field, and may be changed by the radio-user through the DotRed.png Password menu-selection.

  • When the Secure Operation field is set to "Hardware", the Radio Lock password is stored in the hardware encryption module for added security; therefore, it is not directly accessible by the CPS. WFForward.png The password must be manually set in the hardware encryption module via the radio keypad and the DotRed.png Password menu-selection.

HGAccessedOnly.jpg

When the Radio Lock Enable field is "Enabled", and

when the radio is model / option capable.

GoArrow.jpg

Go to the User Information and Passwords Page